FILL BASE (PRIMER) Alcohol-based dyeing primer: evens out the colours of the heel layers. Standard colours: |
USE Preparation for buffing of injection-moulded heels with leather, masonite and assorted heels. |
APPLICATION Sand the heel with abrasive paper grain 80/120, apply the product with a brush or sponge or also by means of immersion. Sand with fine abrasive paper grain 180/220, apply the wax colour CONCENTRATO BT |
PRIMER NERO (BLACK PRIMER) Special deep-penetrating black hardener with strong dyeing power. |
USE See FILL BASE. |
APPLICATION See FILL BASE. |
SBIANCANTE PER CUOIO (LEATHER WITHENER) Acid solution of mineral salts and organic components. |
USE Lightens reddish or aged leather. |
APPLICATION Apply with a spray or sponge. |
INDURITORE PER SUOLE (HEEL HARDENER) Flattens and compacts the fibres on the flesh-side of the hide. Hardens the surface of the sole. Facilitates adhesive application on highly absorbent leather, and prevents cracking during roughing. |
USE Low-cost leather soles (such as Indian and Argentine leather). |
APPLICATION Apply with a spray or brush. |
CONCENTRATO BT TRASPARENTE (TRANSPARENT) Rich carnauba wax emulsion traditionally used for quick and easy finishing. Excellent fastness to light. The only wax product which gives leather a natural appearance. For deep dyeing of the heel, it is recommended to first apply the FILL BASE hardener. Standard colours: neutro (neutral), bruno (brunette), bruno 50 (brunette 50), marrone (brown), marrone scuro (dark brown), marrone scuro 50 (dark brown 50), testa di moro (ebony), |
USE Universal use. Very glossy and transparent colouring of quality leather heels and edges. |
APPLICATION HEEL: • prime the heel with FILL BASE hardener •apply the product with a paintbrush, sponge or automatic machine, •finish with soft cotton fabric brush (TELA EXTRA) and WAX 111 (abrasive wax) or WAX 502 (abrasive colouring wax) to even out the coverage, •Brush with wool hank (LANA MATASSA) or long, soft horsehair brush (CRINE DOPPIO). EDGE: •finish the live cut by sand-paper •set up the pack of soles and spray with 2-3 ATM gun or automatic machine, or apply manually with a brush, •Apply with a sponge and brush with wool hank (LANA MATASSA) or long, soft horsehair brush(CRINE DOPPIO). |
CONCENTRATO BT COPRENTE(COVERING) Similar to CONCENTRATO BT Trasparente, but with additional pigments to cover and even out the treated leather, concealing any defects. It is possible to avoid basic colouring of the heel. Standard colours: nero (black), bruno (brunette), bruno 50 (brunette 50), marrone (brown), marrone scuro (dark brown), testa di moro (ebony), testa di moro 750 (ebony 750). |
USE Very glossy high-coverage colour for dyeing heels and edges even of poor quality leather, reclaimed leather, masonite and composite materials. |
APPLICATION See CONCENTRATO BT TRASPARENTE |
SUPRA BT Similar to CONCENTRATO BT Product line similar to CONCENTRATO BT COPRENTE with a higher concentration of pigments. For hot-iron or brush finishing Standard colours: nero (black), marrone 116 (brown 116), marrone 116/500 (brown 116/500), |
USE See CONCENTRATO BT COPRENTE |
APPLICATION See CONCENTRATO BT TRASPARENTE/COPRENTE |
PENETRANTE BT Deep penetrating dye with a medium concentration of natural wax. Makes hardening and basic colouring of the heels unnecessary. Standard colour: nero (black), cioccolato (chocolate), marrone (brown), marrone scuro (dark brown), marrone sottobosco (mulberry brown) |
USE Glossy transparent dye for injected heels and edges made of quality leather. |
APPLICATION See CONCENTRATO BT |
COLORE PER GUARDOLO (WELT DYE) Water-based dye with high coverage and elasticity. Imparts a special body and sheen to the welt. Available in transparent or covering versions. |
USE Leather and reclaimed leather welts. |
APPLICATION Apply by spraying until the desired coverage is obtained. After drying, spray with DERMAFINISH to fix the colour and impart additional gloss. |
DERMAFINISH Transparent solvent-based varnish. Particularly elastic and glossy, with a pleasant handle and immediate drying. |
USE Leather and reclaimed leather welts and leather uppers. |
APPLICATION Spray application. |
SFORMATURA BEN E 340 Transparent colour with a base of wax and spreading resins with excellent glossing, softening and colour-levelling properties. Also available in high-coverage version for masking imperfections and stains on the sole. Standard colours: neutro (neutral), beige (beige), marrone chiaro (light brown), marrone (brown), marrone scuro (dark brown), mogano (mahogany), bruno ossido (oxide brunette), testa di moro scuro (dark ebony), nero (black). |
USE Uniform and glossy colouring for buffed leather soles. Easy to process because it responds promptly to brushing. |
APPLICATION Apply by spray or flat brush or drum dyeing machine on buffed sole. Allow to dry for a few minutes, brush lightly with fabric disks brush (TELA EXTRA) and WAX 111. Apply with a sponge and brush with wool hank (LANA MATASSA) or long, soft horsehair brush (CRINE DOPPIO). |
SFORMATURA IN PASTA Creamy product with base of waxes and resins, for colouring buffed leather sole. Colour available: 15 colours. |
USE Buffed soles finishing |
APPLICATION Buff the sole with the automatic sanding machine. Apply the product with a sponge. Leave it dry for 5 minutes. Polish with a rotary cloth brush (TELA EXTRA) at about 800 rpm spread with WAX 111 abrasive. Polish with woollen thread brush (LANA MATASSA), treated with WAX CARNAUBA F4N polishing wax. |
DUALSFORM Bivalent solvent-based product for obtaining both colouring and an antique finish. The effect is enhanced on embossed or stamped leather. Standard colours: arancio 41 (orange 41), cuoio (leather), marrone 31 (brown 31), marrone medio (medium brown), bruno 2517 (brunette 2517), nero (black). |
USE Dyeing with antique effect of full grain soles, vegetable-tanned leather belts. |
APPLICATION Apply with a spray or drum dyeing machine until a semi-glossy black coverage is achieved. Allow to dry for 15 minutes, emboss the desired stamp or pattern. Brush with fabric disks brush (TELA EXTRA) and WAX 111. Apply with a sponge and brush with wool hank (LANA MATASSA) or long, soft horsehair brush (CRINE DOPPIO). |
DUALCOLOR Aqueous version of DUALSFORM, suitable for imparting an antique finish. Standard colours: arancio 970 (orange 970), bruno ossido (oxide brunette), marrone scuro 891 (dark brown 891). |
USE Antique-effect colouring of buffed soles. |
APPLICATION See DUALSFORM. |
NABUK (NUBUCK) Solvent-based colour, easily spread and absorbed, with excellent fastness to light. Suitable for dyeing buffed leather soles to obtain a “nubuck” or “velvet” effect, or for achieving a polished and transparent effect on full-grain soles. Possibility of two-tone decorative effects on buffed soles. Standard colours: cuoio (leather), bruno 2018 (brunette 2018), palude 2170 (marsh 2170), |
USE Uniform dyeing of buffed soles with a nubuck effect. Colouring of full grain soles with a polished effect. |
APPLICATION Apply the product using a drum dyeing machine or spray gun. The “writing” or “velvet” effect appears when the sole is dry. |
TUNICOLOR Special ready-to-use varnish for rubber, CORIA, THUNIT and similar materials, with excellent adhesion and maximum elasticity. A self polishing product resistant to folding and achieving an exceptional glossy finish. Available in transparent and highcoverage versions. Standard colours: neutro (neutral), cuoio 63 (leather 63), bruno 83 (brunette 83), marrone chiaro (light brown), marrone scuro (dark brown), testa di moro (ebony), nero (black). |
USE “Pack” colouring of edges made of compact rubber, SBR, THUNIT. |
APPLICATION Clamp tightly approximately 20 pre-milled soles in order to avoid the product to penetrate between layers; -spray the product using an air gun (1.5 mm nozzle, at approx. 2/3 ATM) until the desired coverage is achieved; -after drying, the edges will be shiny. |
POLIVER Solvent-based dye. Self-polishing and quick-drying. Providing a very glossy finish, good adhesion and resistance to light. Can be diluted with SOLVENTE AM. Standard colours: neutro (neutral), marrone (brown), nero (black). |
USE Universal use. Dyeing soles and edges made of compact rubber and synthetic materials. |
APPLICATION Apply by dipping, spraying or brushing. |
VERNITAK Ready-to-use varnish for colouring ABS and polystyrene heels to resemble leather covered heels. Strong adhesive qualities and both scratch and light resistant. Available in three finishes: very glossy, semi glossy and mat. Standard colours: cuoio scuro (dark leather), marrone (brown), testa di moro (ebony), nero (black). |
USE Colouring polystyrene and ABS heels. |
APPLICATION Stir the product before use. Place the mechanical comb in front of the heel if leather-look striping is required. Spray the product using a 1-1.2 mm nozzle. Allow to dry for a few minutes. |
ACSA CHIMICA S.R.L.
SACMA: info@sacmaitaly.com
Tel. +39 0290111039
ACI: acisales@acsachimica.it
Tel. +39 0290310247
VIA PASTEUR 3 – 20018 SEDRIANO
MILANO (ITALY)